AV installers, Home Cinema installers and LED, LCD & Plasma TV installation in London, Essex, Kent, Sussex and Surrey

Picture Gallery


This customer decided to free up some space in their lounge by installing their Sony Bravia 40" LED above the fireplace and their accessory equipment into a cabinet fixed to the wall. We extended their Virgin Media TV & Modem service cables into the cabinet. A screen height was agreed and a slim fit bracket attached to the wall with sufficient size raw plugs and coach bolts. A cable access hole behind the screen and a single hole bottom left of the fireplace were drilled. 3 x HDMI (1 for V+ Box, 1 for PS3 and 1 for Blu-Ray DVD Player) and a power cable for the screen were installed and connected to the equipment. (The fire unit is electric and was removed before our arrival and replaced when we left.)

A Samsung 50" Plasma screen fitted to partition wall, ultra-slim tilting wall bracket fixed with sufficient coach and toggle bolts. A KEF Kit 530 5.1 home cinema system, SKY HD & Sky Broadband, Playstation 3 & Sonos Zoneplayer 90. Using the correct tools, minimal damage was made to the wall to hide speaker cables, HDMI and power cable to the screen (picture shows before wall repair). A brush plate for cable access was fitted to the wall behind the floor unit. Out of the picture are rear left and right speakers fitted to wall with the same cable management.

In this bedroom, we installed the customers 32" Sony Bravia LCD screen onto a solid wall within the wardrobe space. The wall was channelled to conceal the HDMI, RF Aerial, Composite video, audio & power cable to a DVD player situated on the top shelf in the wardrobe. When the room had been plastered and the wardrobes installed, we made a second visit to mount the screen and connect all the necessary cables to the television.

Sub-contracted by one of our clients to provide technical support, a Panasonic 152" plasma screen (The worlds largest plasma screen available on the market) was temporarily installed for an event in Central London. Receiving 3D video and computer graphics at 1920x1080p from several Apple MacBook Pro laptops via a Barco DCS 100 switcher.
* Our client was responsible for providing all equipment and computer graphics. *

This company situated in the City of london were in the process of relocating offices. We were asked to dismantle the existing equipment in the training room consisting of a SmartBoard, NEC VT580 LCD Projector, Unicol Hanging bracket and to re-install at the new office space. We also installed 2 x 42" and 2 x 51" LCD Screens onto pre-strengthened walls. We terminated VGA and 3.5mm Audio and added HDMI to floor plates that we provided. We worked with our client and the site management company to ensure that stages of the installation were complete and that the final installation deadline date was met.

This is a projector and screen installation that was completed at a boardroom in Central London.
We removed a smaller 98" pull down screen and replaced it with a 120" motorized screen complete with remote control.
An Optoma TX615 projector was suspended from the ceiling using a Unicol bracket system. A VGA, 3.5mm jack and HDMI cable were run from the floor box below the boardroom table through the partition wall and over the suspended ceiling to the projector.